Differences

This shows you the differences between two versions of the page.

--- userregister [2025/05/28 14:20]
nightfly
+++ userregister [2025/05/29 14:16] (current)
nightfly
@@ Line 1: / Line 1: @@
 ====== Users and cameras access ======
-By design WolfRecorder is multi-user solution intended which allow strictly divide access of each camera between limited rights users.
+By design, WolfRecorder is a multi-user solution that allows strict separation of access to each camera between users with limited rights.
 {{:wru23.png|}}
-You can register as many users as you want
+You can register as many users as you want.
 {{:wru24.png|}}
-With any of required permissions aka "Roles" right sets
+With any of the required permissions, also known as "Roles" right sets.
 Out of the box, there are three sets of rights:
-  * **Administrator** - have access of all features and can manage every settings
+  * **Administrator** - has access to all features and can manage all settings
-  * **User** - have access only for usage of specified cameras, don have access for any settings
+  * **User** - has access only to specified cameras and cannot access any settings
-  * **Operator** - have usage access for all cameras, cant manage any settings
+  * **Operator** - has access to all cameras but cannot manage any settings
 {{:wru25.png|}}
-Also you can fine-tune permission sets for each user individually but in most cases it have no big sense. Just remember that only following modules supports predefined "sets of rights" policy: "My cameras", "Video from cameras", "Save records", "My records". So that means... that means "just don't touch the default user rights set if you are not sure of the result and how it works".
+You can also fine-tune the permission set for each user individually, but in most cases, it does not make much sense. Just remember that only the following modules support the predefined "sets of rights" policy: "My cameras", "Video from cameras", "Save records", "My records".
+So that means... that means "just don't touch the default user rights set if you are not sure of the result and how it works".
 {{:wru27_1.png|}}
+You can always log in as this user in "Ghost mode" to check which cameras they actually see and whether you have configured everything correctly.
+{{:wru27_2.png|}}
 ===== Cameras ACL =====
-Access of "Users" to registered cameras may be configured using "Cameras access" module
+Access of "Users" to registered cameras can be configured using the "Cameras access" module.
 {{:wru26.png|}}
-Only selected cameras will be set as accessible for users with set of rights "User" on the fly
+Only selected cameras will be made accessible for users with the "User" rights set on the fly.
 {{:wru27.png|}}
+A user with the default "User" rights set will be limited to the following accessible modules and will only be able to use the cameras assigned to them.
+{{:wru28.png|}}

WolfRecorder Wiki

User Tools

Site Tools

Differences

Page Tools